BBRSR - THERMOFIT S-1125 ADHESIVE #3006, PART A
- MSDS: BBRSR
- Manufacturer: RAYCHEM CORP
- Product Name: THERMOFIT S-1125 ADHESIVE #3006, PART A
- National Stock Number: 8040-00F005100
Product Identification
Product ID:THERMOFIT S-1125 ADHESIVE #3006, PART A
MSDS Date:01/01/1987
FSC:8040
NIIN:00F005100
MSDS Number: BBRSR
Responsible Party
Emergency Phone: (415) 361-3333
Cage: FO008
Contractor
Telephone: 650-361-4907
Cage: FO008
Ingredients
POLYAMIDE AMINE
ALUMINUM SILICATE (AS NUISANCE DUST OR PARTICULATES NOT
CAS: 1302-76-7
RTECS: BD1450000
OSHA PEL 15 MG/M3 TOTAL DUST
ACGIH TLV: 10 MG/M3 TDUST;8990
Hazards
Effects of Overexposure:IRRITATING TO EYES, SKIN, NOSE AND THROAT.
SEVERE EYE IRRITANT. MAY BE IRRITATING IF INGESTED.
First Aid
First Aid:EYES: FLUSH WITH WATER FOR 15 MINUTES. SEEK MEDICAL
ATTENTION. SKIN: WASH WITH MILD SOAP AND WATER. CONSULT PHYSICIAN
IF ALLERGIC SYMPTOMS DEVELOP. INGESTION: DO NOT INDUCE VOMITING.
DILUTE WITH WATER OR MILK. SEEK MEDICAL ATTENTION.
Fire Fighting
Flash Point:480F
Extinguishing Media:STANDARD (CO2, DRY CHEMICAL, WATER)
Fire Fighting Procedures:WEAR SELF-CONTAINS BREATHING APPARATUS IN
CLOSED AREAS.
Unusual Fire/Explosion Hazard:TOXIC FUMES MAY BE INVOLVED IN A FIRE.
Accidental Release
Spill Release Procedures:REMOVE WITH INERT ABSORBENT MATERIAL, USING
APPROPRIATE PRECAUTIONS TO PREVENT CONTA OR OTHER EXPOSURE. CLEAN
UP RESIDUE WITH SOAP AND WATER.
Handling
Handling and Storage Precautions:CURING OF ADHESIVE SHOULD BE DONE IN A
WELL-VENTILATED AREA. THE CURING PROCESS IS EXOTHERMIC.
Other Precautions:PREVENT CONTACT WITH SKIN AND EYES. WASH HANDS
THOROUGHLY AFTER USE. USE ONLY WITH ADEQUATE VENTILATION.
Exposure Controls
Ventilation:PROVIDE LOCAL EXHAUST VENTILATION TO KEEP BELOW TLV.
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES/GOGGLES
Other Protective Equipment:PROTECTIVE EQUIPMENT/PROVIDE AS NECESSARY TO
PREVENT CONTACT
Supplemental Safety and Health
MSDS DATE: JUL 86.
Chemical Properties
Spec Gravity:>1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:VISCOUS, GREY PASTE WITH SLIGHT ODOR.
Percent Volatiles by Volume:NEG
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:MAY REACT WITH ACIDS, BASES OR STRONG
OXIDIZING AGE NTS.
Hazardous Decomposition Products:MAY INCLUDE CO,
CO2/ACIDS/ALDEHYDE/NITROGEN COMPOUNDS.
Disposal
Waste Disposal Methods:NORMAL METHODS BASED ON FEDERAL, STATE AND LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.